Model |
YCT306S-M YCT306R-M |
YCT306S-H YCT306R-H |
YCT306S-5 |
YCT406 |
| Engine |
TY395I |
Y485GL |
YSD490T-2 |
Max. Power |
22KW/2000rpm |
22KW/200rpm |
29.4KW/2400rpm |
Bore × stroke |
95mm×105mm |
85mmx90mm |
90mmx100mm |
Lubrication |
Full pressure by rotary pump |
Optimum fuel consumption |
234g/kW |
267.9g/KW |
261g/KW |
Transmission |
Clutch |
Single dry disk diaphgram-spring, 10" pedal control |
Hydraulic reverse shuttle clutch |
Single dry disk diaphgram-spring, 8" pedal control |
Single dry disk diaphgram-spring, 10" pedal control |
Gearbox |
2-shaft, 8Fwd.+2 Rev. Sliding gear shift |
8 Fwd. + 8 Rev. (Reverse shuttle) |
2-shaft, 8Fwd.+2 Rev. Sliding gear shift |
8FWD. + 4Rev. (Direct-drive) |
| Brakes & Steering |
Brakes & Steering |
Steering pedals integrated with the Brake Pedals |
Steering Clutch |
Multiple dry geramtallic Disk Clutch |
Brakes |
Band brakes, Pedals control |
| PTO |
Power take off |
Mechanical dependent |
Speed |
540rpm |
540/1000rpm |
540/1000rpm |
Shaft Diameter |
35mm (1-3/8"), 6 Splines |
| Under Carriage |
Rollers |
Semi-rigid off-track frame |
|
Track rollers |
5+1(each side) |
4+1(each side) |
7+1+1(each side) |
Track recoil system |
Helical spring, Screw Adjusted |
Width of Track shoes |
300mm |
240mm |
290mm |
| Hydraulic system |
Capacity at govered rpm |
25.2Lpm |
20Lpm |
24Lpm |
Relief Valve Pressure |
16MPa |
16MPa |
16MPa |
Blade Capacity |
0.67m³ |
0.45m³ |
0.67m³ |
Lifting capacity at hitch point |
7350N |
7350N |
9500N |
| Weight & Dimension |
L×W×H (mm) |
2960×1640×2140 (with Blade& ROPS) |
2800x140x2100 |
2830x1550x2300 |
Ground clearance |
240-245mm |
280mm |
Operating Weight |
2830Kg (Standard) |
2100kg |
3250kg |
Max. Drawbar Pull |
2350Kg (Steel) 1960Kg (Rubber) |
1800kg |
2550kg |
