SRD International Company Limited -----------
 
Crawler Tractors
 
About us
FAQ
 
Crawler Tractors

    Characteristic explain:

  • Rubber Track & Steel TRack Interchangeable
  • Category 1 3-Point Hitch
  • 6 Way Blade with Easy to Operate Joystick
  • Optional Backhoe Available
     
    ENGINE---

    Powerful 3 cylinders long stroke diesel engine

    Engine
    95mm
    Stroke
    105mm
    Capacity
    2.23L
    Cy1
    3
    Aspir.
    N
    Max. power/rpm
    22kw/2000rpm
    Lubrication
    Full pressure by rotary pump
    Optimum fuel consumption
    234/kw
    TRANSMISSION
    Clutch
    Derict-drive Single Dry Disk Diaphragm-Spring Clutch 10"or Hydraulic Reverse Shuttle Clutch
    Gearbox
    8 Fwd.+2 Rev.(Derict-drive)or 8 Fwd.+8 Rev.(Reverse Shuttle)
    BRAKES & STEERING--- Steering paddles Integrated with the Brake Paddles
    Steering Clutches
    Multiple Dry Ceramtallic Disk Clutches
    Brakes
    Band Brakes
    POWER TAKE-OFF--- Mechanical Dependent
    2 Speeds
    540/1000rpm
    Shaft Diameter
    35mm(1 3/8"),6 Splines
    UNDERCARRIAGE-ROLLERS--- Semi-rigid Track Frame
    Track rollers
    5+1(each side)
    Track recoil system
    Helical Spring,Screw Adjusted
    Width of Track Shoes
    300mm (Standard)
    260mm (Optional)
    HYDRAULIC SYSTEM--- Blade & Hitch
    Capacity @ Governed rpm
    25.2 lpm
    Relief Valve Pressure
    16 MPa(2230 pis)
    Control Valve
    4-Spool
    Blade Control
    Lift:   Raise, Hold, Lower, Float
    Angle:   Right, Hold, Left
    Tilt:   Right, Hole, Left
    Blade Capacity
    0.67m3
    Lifting Capacity @ Hitch Point
    7350N (1650 1bs)
    WEIGHTS & DIMENSIONS--- (In Running Order)
    Max .Length
    2960mm
    Max. Width (With Blade,Straight)
    1640mm
    Tractor Width (no Blade)
    1450mm (Standard)
    1410mm (Optional)
    Track Gauge
    1150mm
    Ground Clearance
    240-245mm
    Operating Weight
    2830kg (Standard)
    2790kg (Optional)
    Max. Draw bar Pull
    2350kg (Steel Track Version)
    1960kg (Rubber Track Version)
Copyright @ SRD International Co. Ltd. 2006